New Bathroom

After a long hiatus, under a strict deadline and impending rainy season I decided to tackle a bathroom, more specifically a modular shower stall. The challenges were to keep it a reasonable size for 190 +/- sq ft, retain usability of the original doors for fast packing, and utilize gravity fed pipes both in and out. [caption id="attachment_271" align="alignnone" width="225"]The Pits help get the shower pan and studs up. The Pits help get the shower pan and studs up.[/caption] I began with a pre-fab shower pan which I mounted on a base made of 2"x 6". For the studs I ripped 2" x 4" down to 2" x 2" which cutout some unnecessary weight and saved space. Most cross pieces were 2" x 2" except the load bearing wall for the kitchen counter and shelves which were reinforced with 2" x 4" cross pieces. I paneled the interior with FRP and called it a day. Some tricky things still to conquer are dealing with the gray water which I tentatively plan to pump into the garden and creating enough water pressure through gravity feed. [caption id="attachment_287" align="alignnone" width="300"]The shower stall finds its home. The shower stall finds its home.[/caption] For now I am traveling through India with an art installation so all modifications will have to wait until after Christmas.

Share this post

Leave a comment

Note, comments must be approved before they are published